User manual

Motorola RF Switch CLI Reference Guide
3-2
enable Turns on (enables) the privileged mode command set page 3-9
exit Ends the current mode and moves down to the
previous mode
page 2-3
help Describes the interactive help system page 2-4
logout Exits the EXEC mode page 3-10
no Negates a command or sets its defaults page 2-5
page Toggles the paging functionality page 3-11
ping Sends ICMP echo messages page 3-12
quit Exits the current mode and moves to the previous
mode
page 3-13
service Displays service commands page 2-7
show Shows running system information. Refer to Common
Commands on page 2-1
page 2-37
telnet Opens a telnet session page 3-14
terminal Sets terminal line parameters page 3-15
traceroute Traces the route to a destination page 3-16
Table 3.1 User Exec Mode Command Summary
Command Description Ref.