User manual

Common Commands
2-135
2.2.56 alarm-log
 Priv Exec Mode
Displays all the alarms on the system
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
show alarm-log {<1-65535>|acknowledged|all|count|new|
severity-to-limit}
Parameters
alarm-log [<1-65535>|
acknowledged|all|count|
new|
severity-to-limit]
Displays all the alarms on the system
• <1-65535>
- Displays the details of a specific alarm ID
• acknowledged
- Displays information for acknowledged
alarms currently in the system
•all
- Displays all the alarms currently in the system
• count
- Displays the number (count) of the alarms
currently in the system
• new - Displays those new alarms currently in the
system
• severity-to-limit [critical|informational
major|normal|warning]
- Displays the alarms having
specified severity, as well as those alarms with a
severity higher than the specified value.
• critical
- Displays all critical alarms
• informational
- Displays all informational or higher
severity alarms
• major
- Displays all major or higher severity alarms
• normal
- Displays all normal or higher severity
alarms
• warning
- Displays all warning or higher severity
alarms