User manual

Common Commands
2-107
Example
RFSwitch>show wireless ap
Number of access-ports adopted : 0
Available licenses : 0
Clustering enabled : N
Clustering mode : primary
RFSwitch>
RFSwitch>show wireless ap-detection-config
Rogue AP timeout : 300 seconds
Approved AP timeout : 300 seconds
mu-assisted scan : enabled
mu-assisted scan refresh : 300 seconds
configured approved-aps :
Index | Bss Mac | Ssid
-------------------------------------------------------
Adaptive minimum adoption version: 2.0.0.0-000R
RFSwitch>
RFSwitch>show wireless ap-images
Idx ap-type Image-Name Size (bytes) Version
1 ap300 WISP-AP300 293516 00.02-29
2 ap300 WIAP-300 244076 01.00-1635b
3 ap300 AP300-IDS-Sensor 295064 00.00-04
4 ap100 AP100 31034 02.05-00
5 ap4131 AP4131 191440 07.00-01
6 ap4131 Revert-AP4131 665704 00.00-00
wlan [config|statistics] Displays wireless LAN parameters. The following
information is displayed:
• config [<1-256>|all|enabled] – Displays the wireless LAN
configuration information. All parameters optional.
• <1-256> – The selected wlan
• all – all wlans in the configuration
• enabled – all wlans that are enabled. Configuration
information for disabled wlans are not displayed.
• statistics <1-256> – Displays the wireless LAN statistics
for:
• <1-256> {detail} – The selected wlan. Optionally
display details.