User manual

Motorola RF Switch CLI Reference Guide
2-100
ap [<1-48>|<MAC>|
config [<1-48>|<MAC>]]
Status of the adopted access port
• <1-48> – Defines the index of the access port
•<MAC> – Sets the MAC address of a access port
• config [<1-1024>|<MAC>] – Status of the configured
access port.
• <1-1024> – AP index from the “show wireless ap”
command
• <MAC> – MAC address of the ap.
ap-containment
[config|table]
Rogue AP containment
• config – Rogue AP Containment Parameters
• table – Rogue AP Containment table
ap-detection-config Detected AP configuration parameters
ap-images Displays the access port images on the switch
ap-unadopted Lists unadopted access ports
approved-aps Displays approved APs detected by access port scans
channel-power
[11a|11b|11bg]
[indoor|outdoor]
Lists the channels and power levels available for a radio
• 11a – Defines the radio as 802.11a
• 11b – Defines the radio as 802.11b
• 11bg – Defines the radio as 802.11bg
These options are available for all the above radio types:
• indoor – Radio is placed indoors
• outdoor – Radio is placed outdoors
client
[exclude-list|include-list]
Wireless client configuration
• exclude-list – Sets the exclude list configuration
• include-list – Sets the include list configuration
config Displays wireless configuration information
country-code-list Displays the list of supported country names and their 2
letter IS0 3166 codes