Installation guide

Switch Information 3-37
5. Select the Start Update button to begin the file updates for the enabled switch configuration, cluster
configuration or firmware facilities.
6. Click the Apply button to save the changes to the configuration.
7. Click the Revert button to revert back to the last saved configuration.
3.7 Viewing the Switch Alarm Log
Use the Alarm Log screen as an initial snapshot for alarm log information. Expand alarms (as needed)
for greater detail, delete alarms, acknowledge alarms or export alarm data to a user-specified location
for archive and network performance analysis.
To view switch alarm log information:
1. Select Switch > Alarm Log from the main menu tree.
2. Use the Alarm Log screen’s filtering options to view alarm log data by page or the by its entire content.
3. Select either of the two available options to view alarm log information:
View By Page Select the View By Page radio button to view alarm log information on a per
page basis. Use the View By Page option to page through alarm logs. If there are
a large number of alarms, the user can navigate to the page that has been
completely loaded. All operations can be performed on the currently loaded data.
Enter a page number next to “Page” and click the
Go button to move to the
specific page.
View All Select the View All radio button to display the complete alarm log with in the
table. If there are a large number of alarms, the View All option will take several
minutes to load.