Installation guide

3-34 Motorola RF Switch System Reference
• USB 2
Transfer files between the switch and the server from any one of the above mentioned locations. Since
compact flash (CF) and USB are external memory locations, the File System window displays the status of
these devices. Transfer files to compact flash and USB only if they are connected and available.
To view the file systems currently available to the switch:
1. Select Switch > File Management from the main menu tree.
2. Select the File Systems tab.
3. Refer to the following File Systems information.
4. Select CF, USB1 or USB2 and click the Format button (enabled only if the CF or USB are connected to the
switch) to check if the memory device is formatted and available. You will be prompted that proceeding
will erase all data on the disk and if you would like to proceed.
SWITCH NOTE: USB 1 is available on the RFS6000 and RFS7000 switches. USB2 and
Compact Flash are only available on the RFS7000 switch.
Name Displays the memory locations available to the switch.
Available Displays the current status of the memory resource. By default, nvram and system
are always available.
• A green check indicates the device is currently connected to the switch and is
available.
• A red X indicates the device is currently not available.
Formatted This displays the format status of the memory devices. This ensures that the
external and internal memory device store the files securely. A formatted memory
device is less prone to crash and loss of data.
• A green check mark indicates the device is currently connected to the switch
and is available.
• A red X indicates the device is currently not available.