Installation guide

Switch Information 3-29
8. Enter the password for FTP server login in the Password field.
9. Enter the complete file path for the file that contains the firmware update in the Path field.
10.Click the Do Update button to initiate the update.
A warning prompt displays. Upon confirming the firmware update, the switch reboots and completes the
firmware update.
11.Click OK to add the changes to the running configuration and close the dialog.
12.Refer to the Status field for the current state of the requests made from the applet. Requests are any
“SET/GET” operation from the applet. The Status field displays error messages if something goes wrong
in the transaction between the applet and the switch.
13.Click Cancel to close the dialog without committing updates to the running configuration.
3.5 Switch File Management
Use the File Management screen to transfer configuration file to and from the switch and review the files
available.
3.5.1 Transferring Files
Use the Transfer Files screen to transfer files to and from the switch.Transferring files is recommended to
keep files in a secure location. The following file transfer options are available:
• Wireless Switch to Wireless Switch
• Wireless Switch to Server
• Server to Wireless Switch
To define the properties of the file transfer configuration:
1. Select Switch > File Management from the main menu tree.
CAUTION: When restarting or rebooting the switch, the Radius server is restarted
regardless of its state before the reboot.
!