Installation guide

D-135
8. In the ASCII Passphrase field, enter the strong passphrase used for device authentication. Select OK
to save the updates.
9. From back at the Network > Wireless LANs > Configuration screen, highlight (select) the newly
created WLAN and select Enable.
If global WLAN manual mapping is enabled, manually assign the new WLAN to each radio you wish to
support. If this global option is disabled, the RF Switch automatically assigns the WLAN to each adopted
radio.
10.Select Save (from the lower left-hand corner) to apply the changes.
D.9.4 RF Switch Running Configuration
The following shows the running configuration of the RFS6000 switch used to create this tutorial:
RFS6000# show running-config
!
! configuration of RFS6000 version 3.3.0.0-029R
!
version 1.2
!
!
aaa authentication login default local none
service prompt crash-info
!
username "admin" password 1 b6b6ccabdb85763872c7fbdf436ec2ed86bf931e
username "admin" privilege superuser
username "operator" password 1 b6b6ccabdb85763872c7fbdf436ec2ed86bf931e
!