Installation guide

D-132 Motorola RF Switch System Reference Guide
12.From back at the Network > Wireless LANs > Configuration screen, highlight (select) the newly
created WLAN and select Enable.
If global WLAN manual mapping is enabled, manually assign the new WLAN to each radio you wish to
support. If this global option is disabled, the switch automatically assigns the WLAN to each adopted
radio.
13.Select Save (from the lower left-hand corner) to apply the changes.
D.9.3.4 802.11i with Pre-Shared Key Authentication
As depicted in illustration below, five AP300s are deployed at a site with a single RF Switch. A WLAN named
MOTO-VOICE has been created to provide secure 802.11i pre-shared-key authenticated access for Wi-Fi
voice handsets. All authenticated voice handsets are statically mapped to voice VLAN 80.