Installation guide

D-128 Motorola RF Switch System Reference Guide
D.9.3.2 Components
The information in this section is based on the following Motorola hardware and software versions:
• 1 RFS6000 model switch
• 5 AP300 model Access Ports
D.9.3.3 802.11i with 802.1x Authentication
As depicted in the illustration below, five AP300s have been deployed at a site supported by a single RF
Switch. A WLAN named MOTO-DATA has been created to provide secure 802.11i 802.1X authenticated
access for Enterprise data users. Authentication is provided using an external Microsoft IAS Radius server
configured with a remote access policy for PEAP authentication. Since this site is small, all authenticated
data users are statically mapped to data VLAN 40. However, dynamic VLAN assignments can be enabled at
a later date if required.
Switch Web UI Configuration
To configure 802.11i with 802.1X on a RF Switch:
1. From the menu tree select Network > Wireless LANs.
2. Select the Configuration tab.
WLAN ESSID VLAN(s) Authentication Encryption
1 MOTO-DATA 40 802.1x CCMP