Installation guide

D-117
6. Highlight the MU-ACL created in steps 3-5 and select Memberships.
7. Check the WLAN index number(s) to associate the MAC-ACL with.
In this example the MAC-ACL is associated with MOTO-GUEST WLAN-2. Click OK.
8. Select Save (from the lower left-hand corner) to apply the changes.
D.8.1.4 Wireless Filters that Allow
Wireless filters can also be used to allow access to a specific group of devices such as mobile handhelds or
VoIP handsets while blocking associations to other devices. Since most enterprises typically deploy mobile
devices from a common vendor, the vendors OUI can be leveraged in a wireless filter to restrict access to a
range of vendor devices. Since no implicit deny is provided, an additional wireless filter must be created after
the allow filter to block access from all other vendor devices.
NOTE: A current list of vendor assigned OUIs can be downloaded directly from the IEEE
web site: http://standards.ieee.org/regauth/oui/iab.txt.