Installation guide

D-106 Motorola RF Switch System Reference Guide
8. In the All Traps tree, locate Wireless > AP Detection, then select the Unapproved AP detected and
Unapproved AP removed traps. Select Enable Trap.
9. Click Apply.
10.From the menu tree select Management Access > SNMP Trap Configuration.
11.Select the Configuration tab.
12.In the All Traps tree, locate Wireless > Intrusion Detection, then select the Excessive violation
from mobile unit, Excessive violation from radio and Excessive violation from switch traps.
Select Enable Trap.
13.Click Apply.