Installation guide

D-101
3. Select the Enable Containment checkbox. Select Apply.
4. Select the Unapproved APs (AP Reported) tab.
5. To contain an unauthorized AP, select an entry from the Unapproved APs list and click Contain.
This adds the MAC address of the unauthorized AP to the AP Containment list.
6. Select the AP Containment tab.
The unauthorized AP is listed in the containment list. You can manually add additional unauthorized AP
MAC addresses to the containment list or remove unauthorized APs as needed.
CAUTION: Care should be taken when using unauthorized AP containment to ensure
containment is not being performed on authorized neighboring APs.
!