Installation guide

D-98 Motorola RF Switch System Reference Guide
4. Within the Network > Access Port Radio > Configuration screen, refer to the Properties field and
check the option Single-channel scan for Unapproved APs (for radios 1- 4 and 7-8) and Dedicate
this AP as a Detector AP (for radios 5-6).
In this example radios 1-4 and 7-8 will be configured for single channel scanning and radios 5-6 are
configured as dedicated detectors.
5. From the switch menu tree select Security > Access Point Detection.
6. Select the Configuration tab.