Installation guide

D-81
• A default pre shared secret be defined on the RF Switch. This configures the shared secret on all AP300s
added to the RF Switch
• A new AP300 be added to the RF Switch
• Pre staging and secure mode are enabled for the new AP300
• An AP300 be connected to the network to allow the shared key to be applied
• Pre staging mode be disabled once the a AP300 is adopted by the RF Switch
Web UI Configuration
The following configuration example demonstrates how to enable secure WiSPe on new AP300s:
1. From the switch menu tree select Network > Access Port.
2. Select the WISPe tab.
MAC Address Secure Mode Pre Staging Shared Secret
00-15-70-78-f5-23 Enabled Disabled pre shared key
00-15-70-b2-fd-cf Enabled Disabled pre shared key
00-15-70-b2-fd-d0 Enabled Disabled pre shared key
00-15-70-d5-da-fb Enabled Disabled pre shared key
00-15-70-d5-da-ce Enabled Enabled pre shared key