Installation guide

D-78 Motorola RF Switch System Reference Guide
3. Highlight and select the AP300s then click Edit.
4. Check the Secure Mode and Pre Staging Mode options.
This enables secure WiSPe on existing AP300s and allows the AP300s to receive the new shared key
upon re-adoption.
5. In the Shared Secret field enter the new shared secret to be applied to the AP300s. In this example, the
shared secret new-pre-shared-key is defined. Click OK.
The updates are reflected within the Secure WISPe table.
6. From the switch menu tree select Network > Access Port Radios.