Installation guide

D-60 Motorola RF Switch System Reference Guide
The RF Switch has a standard IP ACL applied to interface vlan10 which permits IP access from the
Services / Management and Access Point subnets but denies access from all other subnets. This example
provides IP access for management servers, clients and APs while restricting access to all other users and
devices.
Switch Web UI Configuration
The following demonstrates how to create a standard IP ACL and apply it to the management IP interface:
1. From the switch menu tree select Security > Firewall.
2. Select the Configuration tab.
3. Click Add.
4. Select Standard IP List from the ACL Type drop-down menu.
5. Enter an ACL ID (1-99) and click OK.