Installation guide

3-14 Motorola RF Switch System Reference
Read-only details about the port’s cabling connection also display within the Edit screen. This
information should be used to determine the configuration defined for this port.
5. Click the OK button to commit the changes made to the port configurations.
6. Click Cancel to disregard any changes and revert back to the last saved configuration.
3.2.2 Viewing the Ports Runtime Status
The Runtime tab displays read-only runtime configuration for uplink and downlink ports.
To view the runtime configuration details of the uplink and downlink ports:
1. Select Switch > Port from the main menu tree.
Name Displays the read-only name assigned to the port.
Speed Select the speed at which the port can receive and transmit the data. Select from
the following range:
• 10 Mbps
• 100 Mbps
• 1000 Mbps
•Auto
Duplex Modify the duplex status by selecting one of the following options:
•Half
•Full
•Auto
Channel Group Optionally, set the Channel Group defined for the port. The switch bundles
individual Ethernet links (over the selected channel) into a single logical link that
provides bandwidth between the switch and another switch or host. The port
speed used is dependant on the Duplex value selected (full, half or auto). If a
segment within a channel fails, traffic previously carried over the failed link is
routed to the remaining segments within the channel. A trap is sent upon a failure
identifying the switch, channel and failed link.
Description Enter a brief description for the port. The description should reflect the port’s
intended function to differentiate it from others with similar configurations.
Admin Status Either Enable (activate) or Disable (shutdown) the admin status of the port.
Medium Displays the current (read-only) connection medium used by this port.