Installation guide

D-40 Motorola RF Switch System Reference Guide
4. Change the default MU to MU Traffic option from Allow Packets to Drop Packets.
This will disable MU to MU communications for all users associated with the SSID. Click OK.
5. Select Save (from the lower left-hand corner) to apply the changes.
D.3.2 RF Switch Running Configuration
The following is the running configuration on the RFS6000 switch used to create this MU to MU disallow
tutorial:
RFS6000# show running-config
!
! configuration of RFS6000 version 3.3.0.0-029R
!
version 1.2
!
!
aaa authentication login default local none
service prompt crash-info
!