Installation guide

D-26 Motorola RF Switch System Reference Guide
5. View client location by issuing a show rtls tags command. This command displays each clients X,Y
coordinate and zone.
RFS7000(config-rtls-sole)# show rtls tags
Switch Web UI Configuration
The following steps demonstrate how to enable the integrated RTLS engine and track Wi-Fi clients at a site:
1. From the switch menu tree select Services > RTLS.
2. Select the SOLE tab
3. Enable locationing for all clients by clicking the Locate All Mobile-Units checkbox.
You can also modify the default location interval by changing the value in the MU Locate Interval field.
Click Apply when completed.
All associated MUs display in the MU MAC table.