Installation guide

D-20 Motorola RF Switch System Reference Guide
Defining the AP Information
The following steps demonstrate how to define AP location using the switch CLI:
1. In the RTLS configuration context, add each Access Point and specify the MAC Address and X,Y,Z
coordinates by issuing the ap command. In this example four APs are added to the site:
Syntax: ap <ap-mac> coordinates x <value> y <value> z <value>
RFS7000(config-rtls)# ap 00-15-70-78-F5-23 coordinates x 30 y 10 z 16
RFS7000(config-rtls)# ap 00-15-70-D5-DA-FB coordinates x 10 y 30 z 16
RFS7000(config-rtls)# ap 00-15-70-B2-FD-CF coordinates x 50 y 50 z 16
RFS7000(config-rtls)# ap 00-15-70-B2-FD-D0 coordinates x 75 y 20 z 8
AP Number MAC Address X Axis Y Axis Z Axis
1 00-15-70-78-F5-23 30 10 16
2 00-15-70-D5-DA-FB 10 30 16
3 00-15-70-B2-FD-CF 50 50 16
4 00-15-70-B2-FD-D0 75 20 8