Installation guide

D-16 Motorola RF Switch System Reference Guide
D.2.4 Defining an Integrated WLAN RTLS Configuration
This section provides the following RFS7000 tasks to enable the integrated real-time locationing engine:
• Site Information
• Access Point Location
• Location Zones
• Locating Clients
D.2.4.1 Requirements
The following requirements must be met prior to attempting this configuration:
• One (or more) RF Switches are installed and operational on the network
• Radio adoption parameters are configured on all the RF Switches in the cluster so each AP can be
adopted by any cluster member RF Switch
NOTE: The configuration outlined in the Network Topology is not necessarily applicable
to all customer environments.
NOTE: For a listing of the radio, switch and Ethernet switch configurations used in the
development of this tutorial, see Baseline Configurations on page D-27.