Installation guide

D-8 Motorola RF Switch System Reference Guide
D.1.3 RF Switch Running Configuration
The following is the running configuration on the RFS6000 switch used to create this AP300 sensor
conversion tutorial:
RFS6000# show running-config
!
! configuration of RFS6000 version 3.3.0.0-029R
!
version 1.2
!
!
aaa authentication login default local none
service prompt crash-info
!
username "admin" password 1
b6b6ccabdb85763872c7fbdf436ec2ed86bf931e
username "admin" privilege superuser
username "operator" password 1
b6b6ccabdb85763872c7fbdf436ec2ed86bf931e
!
!
!
spanning-tree mst configuration
name My Name
!
crypto pki trustpoint ESELAB
subject-name "rfs6000" US "TN" "Johnson City" "Motorola Inc."
"WLAN Enterprise Division"
fqdn "rfs6000.eselab.com"
ip-address 192.168.10.14
!
management secure
ip domain-name eselab.com
ip name-server 192.168.10.5
no bridge multiple-spanning-tree enable bridge-forward
country-code us
logging buffered 7
logging console 4
logging host 192.168.10.5
snmp-server engineid netsnmp 6b8b456748daa1a5
snmp-server location Johnson City TN
snmp-server contact [e-mail]
snmp-server sysname RFS6000
snmp-server manager v3