Installation guide

Switch Information 3-7
3. The Environment section displays the CPU temperature. It displays the valid threshold range set by the
user.
4. The CPU/Memory section displays the free memory available with the RAM.
5. The File Systems section displays the free file system available for:
•flash
•nvram
• system
3.1.3.2 RFS7000 Switch Dashboard
The Dashboard screen displays the current health of the switch and is divided into fields representing the
following important diagnostics:
•Alarms
• Ports
• Environment
• CPU/Memory
• File Systems
Apart from the sections mentioned above, it also displays the following status:
Speed
Displays the speed at which the port transmits or receives data.
Duplex
Displays the status of the port, either— Full Duplex or Unknown.
Redundancy State Displays the Redundancy State of the switch. The status can be either Enabled or
Disabled.
• Enabled - Defined a green state.
• Disabled - Defined by a yellow state.
Firmware Displays the Firmware version of the current software running on the wireless
switch.
Management IP Displays the Management IP address of the switch.
Access Ports Displays the total number of Access Ports adopted by the switch.
Mobile Units Displays the total number of MUs associated with the switch.
Up Time Displays the actual switch uptime. The Uptime is the current operational time of
the device defined within the System Name field. Uptime is the cumulative time
since the switch was last rebooted or lost power.