Installation guide

Diagnostics 8-17
9. If Server has been selected as the source, enter the User ID credentials required to send the file to the
target location. The User ID is required for FTP transfers only.
10.If Server has been selected as the source, enter the Password required (for FTP transfers) to send the
file to the target location.
11.Specify the appropriate path name to the target directory on the local system disk or server as configured
using the "To" parameter. If local server is selected, use the Browse button to specify a location on your
local machine.
12. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
13.Click the Transfer button when ready to move the target file to the specified location. Repeat the
process as necessary to move each desired log file to the specified location.
14.If a problem condition is discovered during the file transfer, click the Abort button to terminate the
transfer.
15. Click the Close button to exit the dialogue and abandon the transfer.
8.5 Debugging the Applet
Refer to the Applet Debugging screen to debug the applet. This screen allows you to view and debug
system events by a criticality level you define.
1. Select Diagnostics > Applet Debugging from the main menu.
2. To use this window, select the Enable Web-UI Debug Mode checkbox.
The Applet Debugging field is partitioned into the following editable fields:
• Send log message to a file.
• Use SNMP v2 only.
• Message Severity.