Installation guide

3-2 Motorola RF Switch System Reference
3.1.1 Setting the Switch Country Code
When initially logging into the system, the switch requests that you enter the correct country code for your
region. If a country code is not configured, a warning message will display stating that an incorrect country
setting will lead to the illegal use of the switch. Consequently, selecting the correct country is extremely
important. Each country has its own regulatory restrictions concerning electromagnetic emissions (channel
range) and the maximum RF signal strength transmitted. To ensure compliance with national and local laws,
be sure to set the Country value correctly.
3.1.2 Viewing the Switch Configuration
To view a high-level display of the switch configuration:
1. Select Switch from the main menu tree.
2. Click the Configuration tab.
3. Refer the System field to view or define the following information:
NOTE: When the switch’s configuration is successfully updated (using the Web UI), the
effected screen is closed without informing the user their change was successful.
However, if an error were to occur, the error displays within the effected screen’s Status
field and the screen remains displayed. With file transfer operations, the transfer screen
remains open during the transfer and remains open upon completion (with status
displayed within the Status field).