Installation guide

7-22 Motorola RF Switch System Reference Guide
3. Enter the login name for the user in the Username field. Ensure this name is practical and identifiable
to the user.
4. Enter the authentication password for the new user in the Password field and reconfirm the same again
in the Confirm Password field.
5. Select the role you want to assign to the new user from the options provided in the Associated Roles
panel. Select one or more of the following options:
Monitor Select Monitor to assign regular user permissions without any administrative
rights. The Monitor option provides read-only permissions.
Help Desk Manager Assign this role to someone who typically troubleshoots and debugs problems
reported by the customer. The Help Desk Manager typically runs troubleshooting
utilities (like a sniffer), executes service commands, views/retrieves logs and
reboots the switch.
Network
Administrator
The Network Administrator has privileges to configure all wired and wireless
parameters like IP config, VLANs, Layer 2/Layer 3 security, WLANs, radios, IDS and
hotspot.
System Administrator Select System Administrator to allow the user to configure general settings like
NTP, boot parameters, licenses, perform image upgrade, auto install, manager
redundancy/clustering and control access.
Web User
Administrator
Assign Web User Administrator privileges to add users for Web authentication
(hotspot).
Super User Select Super User to assign complete administrative rights.