Installation guide

7-20 Motorola RF Switch System Reference Guide
3. Create a new (non DNS name) destination IP Address for the new trap receiver to be used for receiving
the traps sent by the SNMP agent.
4. Define a Port Number for the trap receiver.
5. Use the Protocol Options drop-down menu to specify the trap receiver as either a SNMP v2c or v3
receiver.
6. Click OK to save and add the changes to the running configuration and close the dialog.
7. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
8. Click Cancel to close the dialog without committing updates to the running configuration.
7.6 Configuring Management Users
Refer to the Users screen to view the administrative privileges assigned to different switch users. You can
modify the roles and access modes assigned to each user. The Users screen also allows you to configure the
authentication methods used by the switch. Use this screen for the following permission configuration
activities:
• Configuring Local Users
• Configuring Switch Authentication
Additionally, the switch Web UI has the facility for creating guest administrators for creating guest users
with defined login periods to specific guest groups. For more information, see Creating a Guest Admin and
Guest User on page 7-25.
7.6.1 Configuring Local Users
Refer to the Local Users tab to view the administrative privileges assigned to users, create a new user and
configure the associated roles and access modes assigned to each user.
To configure the attributes of Local User Details:
1. Select Management Access > Users from the main menu tree.
2. Click the Local Users tab.