Installation guide

7-16 Motorola RF Switch System Reference Guide
4. Select a threshold and click the Edit button to display a screen wherein threshold settings for the MU,
AP and WLAN can be modified.
Adjust the values as needed (between 0 -100) to initiate a trap when the value is exceeded for the MU,
AP or WLAN. Ensure the value set is realistic, in respect to the number of MUs and APs supporting
WLANs within the switch managed network.
5. Use the Maximum Number of Packets to Send a Trap field (at the bottom of the screen) to enter a
value used as the minimum number of data packets required for a trap to be generated for a target event.
Ensure the value is realistic, as setting it to low could generate traps unnecessarily. Refer to Wireless
Trap Threshold Values on page 7-17 for additional information.
6. Click the Apply button to save changes made to the screen since the last saved configuration.
7. Click the Revert button to revert the screen back to its last saved configuration. Changes made since the
contents of the screen were last applied are discarded.