Installation guide

Switch Management 7-13
7. Highlight a specific trap and click the Disable button to disable the item as an active SNMP trap.
The items previously enabled (with a check to the left) now display with an "X" to the left of it.
8. Highlight a sub-menu header (such as Redundancy or Update Server) and click the Enable all sub-items
button to enable the item as an active SNMP trap.
Those sub-items previously disabled (with an "X" to the left) now display with a check to the left of them.
Once the Apply button is clicked, the selected items are now active SNMP traps on the system.
9. Highlight a sub-menu header (such as Redundancy or SNMP) and click the Disable all sub-items button
to disable the item as an active SNMP trap.
Those sub-items previously enabled (with a check to the left) now display with an "X" to the left of them.
10.Click Apply to save the trap configurations enabled using the Enable or Enable all sub-items options.
11.Click Revert to discard any updates and revert back to its last saved configuration.
7.4.1.1 Configuring E-mail Notifications
To enable e-mail notification:
1. Select Management Access > SNMP Trap Configuration from the main menu tree.
2. Click the Email Configuration button to launch a dialogue where you can configure outgoing E-mail
servers and addresses for alerts.