Installation guide

Switch Web UI Access and Image Upgrades
5. Reset the AP if you changed the AP's IP address, buy displaying the System Summary and selecting the
Reset AP option. If you reset the AP-4131 you will need to login as Admin again.
6. Select the Special Functions main menu item.
7. Select the Firmware Update Menu-[F3] menu item
8. Select the Alter Filename(s)/HELP URL/TFTP Server menu item.
a. Confirm that the Firmware File Name is correct, make changes as needed.
b. Enter the IP address of your TFTP server, select enter.
c. Select F1 to save your changes.
9. Select Firmware under the Use TFTP to update Access Point's option.
10.Select yes when asked to confirm.
11.The AP-4131 will now reset, download and install the desired firmware.
12.Once the firmware download is complete, connect the AP-4131 to the PoE switch and the RF Switch The
AP-4131 should adopt and operate as a “thin” Access Port.