Installation guide

Switch Security 6-105
10.Check the Save the certificate request option to save the certificate request to an external server.and
provide the server information in the fields below:
11.Click the Next button to complete the certificate request.
Using the Wizard Delete Operation
The wizard can also be used to delete entire trustpoints, the certificate used with a trustpoint or the CA root
certificate use with a trustpoint. Delete trustpoint properties as they become obsolete or the properties of a
certificate are no longer relevant to the operation of the switch.
To use the wizard to delete trustpoint properties:
1. Select the Delete Operations radio button and click the Next button.
The next page of the wizard is used to delete a trustpoint.
To
Use the To field to define whether the target certificate is to be sent to the
system's local disk (Local Disk) or to an external server (Server).
File Specify a filename for the certificate to be save as on the target server or local
disk.
Using Use the Using drop down-menu to configure whether the log file transfer is sent
using FTP or TFTP.
IP Address Specify the server IP Address used as the switch destination for certificate
requests.
User ID Enter the User ID credentials required to send the file to the target location.
Use the User ID for FTP transfers only
Password Enter the Password required to send the file to the target location using FTP.
Path Specify the appropriate Path name to the target directory on the local system disk
or server as configured using the "To" parameter.