Installation guide

2-6 Motorola RF Switch System Reference
2.5 AP-4131 Access Point to Access Port Conversion
To convert an AP-4131 fat Access Point to a thin AP-4131 Access Port you need to load the port conversion
version firmware. Refer to the files available with you Motorola Web site download package.
To convert an AP-4131 Access Point
1. Verify a TFTP server is up and running and the firmware you are going to install is in the root directory of
the TFTP server.
2. Log in to the AP-4131 as Admin. The default password is Symbol.
3. Select the AP Installation main menu item.
4. From the IP Address field, enter a new IP address (if required) and select Save-[F1] to save the change.
If the IP address was changed, you will need to reset the AP for the change to be implemented.
SWITCH NOTE: AP-4131 Access Point to Access Port Conversion is only available on
the RFS6000 platform.