Installation guide

6-92 Motorola RF Switch System Reference Guide
Modify the existing user’s guest designation, password, expiry date and group assignments as required
to reflect the user’s current local Radius authentication requirements.
5. If an existing user is no longer needed, select the user from those displayed and click the Delete button
to permanently remove the user.
6. To create a new user for use with the local Radius server, click the Add button and provide the following
information.
CAUTION: If password encryption is not enabled, Radius user passwords are stored in
the running configuration file in clear text. The user passwords are shown as encrypted if
the global password encryption is enabled. The maximum for the file is 5000 users, 100
groups, 25 clients, 5 realms and 2 LDAP servers.
User ID Define a unique user ID that differentiates this user from others with similar
attributes.
Guest User Select the Guest User checkbox to assign this particular user temporary access
to the local Radius server, thus restricting their authentication period to a user
defined interval.
Password Enter the password that adds the user to the list of approved users displayed
within the Users tab.
Confirm Password Re-enter (confirm) the password used to add the user to the list of approved users
displayed within the Users tab.
Current Switch Date Displays the read only switch time. This is the time used for expiry data and
time.sers tab.
Start Date & Time Defines the start date and time (in dd:MM:yyyy-hh:mm format) to login guest
users defined with temporary (guest) permissions.
Expiry Date & Time Defines the date and time (in dd:MM:yyyy-hh:mm format) to timeout guest users
defined with temporary (guest) permissions.
Available Groups Use the Available Groups Add -> and Remove <- functions to map groups (for
inclusion) for this specific user.
Configured Group Displays existing groups available for the user.
!