Installation guide

Switch Security 6-73
8. If you require a new Radius Server be configured, click the Add button.
Set this server’s designation as a primary or secondary Radius Server (using the checkboxes), define the
server IP address, port and shared secret password. Click OK when completed to save the changes.
9. If the User Table checkbox was selected from within the Configuration field, select the User Table tab
to review the User Name and Passwords defined for use.
10.Click the Add button to display a screen used to add a new User and Password. Enter a User Name and
Password and confirm. Click OK to save the changes.
11.To change an existing user’s password, select the user from within the User Table and click the Change
Password button. Change and confirm the updated password.
12.If necessary, select an existing user and click the Delete button to remove that user from the list
available within the User Table.
6.7.4 Configuring Crypto Maps
Crypto Maps allow you to set restrictions preventing peers with specific certificates (especially certificates
with particular DNs) from accessing selected encrypted interfaces. If restricting access, specify a fewer
number of Crypto Maps (referring to large identity sections) instead of specifying a large number of Crypto
Maps (referring to small identity sections).
To define the Crypto Map configuration:
1. Select Security > IPSec VPN from the main menu tree.
2. Click the Crypto Maps tab.
The Crypto Maps screen is divided into 5 tabs, each serving a unique function in the overall Crypto Map
configuration. Refer to the following:
• Crypto Map Entries
• Crypto Map Peers
• Crypto Map Manual SAs
• Crypto Map Transform Sets
• Crypto Map Interfaces
6.7.4.1 Crypto Map Entries
To review, revise or add Crypto Map entries:
1. Select Security > IPSec VPN from the main menu tree.