Installation guide

6-46 Motorola RF Switch System Reference Guide
5. Select an interface and click the Details button to display a more robust set of statistics for the selected
interface.
6. Click the Export to export the selected ACL attribute to a user specified location.
6.4.15.2 Viewing DHCP Snoop Entry Statistics
To review DHCP Snoop Entry statistics:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click the Statistics tab.
3. Select the DHCP Snoop Entry tab.
4. Refer to the following information as displayed within the DHCP Snoop Entry tab:
Protocol Displays the permit, deny or mark designation for the ACL. If the action is to mark,
the packet is tagged for priority or type of service.
Low Source IP Displays the Low Source IP Address from where the packets are sourced.
High Source IP Displays the High Source (highest address in available range) IP Address from
where the packets are sourced.
Low Destination IP Displays the Low Destination (lowest address in available range) IP Address.
High Destination IP Displays the High Destination IP Address.
Packets In Displays the number of packets (in bytes) transmitted over the ACL.
Packets Out Displays the number of instances this ACL has been used. Periodically review to
determine whether specific ACLs should be deleted or modified to make relevant.
Client IP Address Displays the DHCP Client IP Address for each entry.
VLAN ID Displays the VLAN ID number, if any, for each entry in the DHCP Snoop Entry table.