Installation guide

Switch Security 6-45
5. When all logging options have been modified, click the Apply button to commit those changes to the
switch.
6. To undo any changes and go back to the previously saved logging options, click the Revert button.
6.4.15 Reviewing Firewall and ACL Statistics
Use the Statistics tab to view set of statistics for ACL, DHCP Snoop Entry and Role based firewalls.
6.4.15.1 Reviewing ACL Statistics
To review ACL statistics:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click the Statistics tab.
3. From the Statistics section select the Statistics tab.
4. Refer to the following information as displayed within the Statistics tab:
Multicast Log The Multicast Log field displays the level of syslog logging enabled for excessive
multicast on an interface. The logging level uses the same standard Syslog levels.
To change the logging level, click on the specific field and choose the logging level
from the drop-down menu.
Unknown Unicast
Log
The Unknown Unicast Log field displays the level of syslog logging enabled for
excessive unknown unicasts on an interface. The logging level uses the same
standard Syslog levels. To change the logging level, click on the specific field and
choose the logging level from the drop-down menu.
Interface Interface displays the physical/virtual interfaces used to add the ACL association
to the switch.
Action Displays the permit, deny or mark designation for the ACL. If the action is to mark,
the packet is tagged for priority.