Installation guide

Switch Security 6-31
be selected from those available and edited or deleted. Additionally, a new filter can be added if an existing
filter does not adequately express the MU’s address range required.
To display the Wireless Filters main page:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click on the Security Policy tab.
3. Click on the Wireless Filters tab.
4. The Wireless Filters tab contains the following read-only information:
5. If the properties of an existing filter fulfill to your needs but still require modification to better filter
devices, select the Edit button. For more information see,
Editing an Existing Wireless Filter on page 6-32.
6. If an existing filter is now obsolete, select it from those listed and click the Delete button.
MU-ACL Index Displays a numerical identifier used to associate a particular ACL to a range of
MAC addresses (or a single MAC address) that are either allowed or denied
access to the switch managed network.
Starting MAC Displays the beginning MAC Address (for this specific Index) either allowed or
denied access to the switch managed network.
Ending MAC Displays the ending MAC Address (for this specific Index) either allowed or denied
access to the switch managed network.
Zone ID Displays a Zone ID associated with each Wireless Filter. Zone ID can be between
1 and 48.
Zones allows you to associate firewall policies to each zone. All
members of the same zone will have the same firewall policies applied to
them.
Allow/Deny States whether this particular ACL Index and MAC address range has been
allowed or denied access to the switch managed network.
WLANs Displays the WLANs associated with each Wireless Filter.