Installation guide

6-30 Motorola RF Switch System Reference Guide
6. Refer to the Status field for the state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
7. Click OK to use the changes to the running configuration and close the dialog.
8. Click Cancel to close the dialog without committing updates to the running configuration.
6.4.7 Configuring Wireless Filters
Use filters to either allow or deny a MAC address (or groups of MAC addresses) from associating with the
switch. Refer to the Wireless Filters screen to review the properties of existing switch filters. A filter can
ESSID Select an ESSID filter, if any, to apply to the role.
Available ESSID filters are:
• Exact: The role will only be applied when the exact ESSID string specified in
the role
• Contains: The role will be applied when the ESSID contains the string specified
in the role
• Not Contains: The role will be applied when the ESSID does not contain the
string specified in the role
• Any: The role is applied to any ESSID
Group Name Select a Group Name filter, if any, to apply to the role.
Available Group Name filters are:
• Exact: The role will only be applied when the exact Radius Group Name string
specified in the role
• Contains: The role will be applied when the Radius Group Name contains the
string specified in the role
• Not Contains: The role will be applied to when the Radius Group Name does
not contain the string specified in the role
• Any: The role will be applied to any Radius Group Name
MU MAC Address Configure the MU MAC Address filters, if any, applied to each role. The MU MAC
Address filter can be set to apply the role to any MU MAC Address or a specific
MU MAC Address or a MU MAC Mask.
Authentication Select an Authentication filter, if any, to apply to the role.
Available Authentication filters are:
• Equals: The role will only be applied when the Authentication type matches the
exact Authentication method specified in the role
• Not Equals: The role will only be applied when the Authentication type does not
match the exact Authentication method specified in the role
• Any: The role will be applied to any Authentication type
Encryption Select an Encryption filter, if any, to apply to the role.
Available Encryption filters are:
• Equals: The role will only be applied when the Encryption type matches the
exact Encryption method specified in the role
• Not Equals: The role will only be applied when the Encryption type does not
match the exact Encryption method specified in the role
• Any: The role will be applied to any Encryption type