Installation guide

Switch Security 6-29
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the Role tab.
4. Click the Add button.
5. To create a new role configure the following information:
Sequence Number Enter a sequence number to be associated with each role. Sequence numbers
determine the order that role are applied. Roles with lower sequence numbers are
applied before those with higher sequence numbers. Sequence numbers are
assigned when a role is created and cannot be edited.
Role Name Enter a name for each role. The role name is configured when the role is created
and cannot be edited.
AP Location Select an AP Location filter, if any, to apply to the role.
Available AP Location filters are:
• Exact: The role will only be applied to APs with the exact location string
specified in the role
• Contains: The role will be applied to APs whose location contains the location
string specified in the role
• Not Contains: The role will be applied to APs whose location does not contain
the location string specified in the role
• Any: The role will be applied to any AP Locations