Installation guide

Switch Security 6-23
4. Refer to the following information as displayed within the Attach-WLAN tab:
5. Select a WLAN (by row) and click Edit to modify the WLAN Index, IP ACL and MAC ACL values.
6. Select a row and click the Delete button to delete the ACL from the list available (but not from the
switch).
7. Click the Add button to add an ACL to a WLAN interface. For more information, see Adding or Editing a
New ACL WLAN Configuration on page 6-23.
6.4.3.1 Adding or Editing a New ACL WLAN Configuration
After creating an ACL, it can be applied to one or more WLANs on the switch. To attach an ACL to a WLAN:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click the Security Policy tab.
3. Click the Attach-WLAN tab.
4. Click the Add button to create a new ACL WLAN association or highlight an existing association and click
the Edit button.
5. Define a WLAN Index between 1 and 32.
6. Use the IP ACL drop-down menu to select an IP ACL for the WLAN.
7. Use the MAC ACL drop-down menu to select the MAC ACL for the WLAN interface.
8. Select either the Inbound or Outbound radio button to define which direction the ACL applies.
9. Refer to the Status field for the state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel to close the dialog without committing updates to the running configuration.
WLAN Index Displays the list of WLANs attached with ACLs.
IP ACL Displays the IP ACL configured.
MAC ACL Displays the MAC ACL configured.
Direction Displays whether the WLAN ACL is configured to work in an inbound or outbound
direction.