Installation guide

5-66 Motorola RF Switch System Reference
2. Select the Site tab.
3. Click the Add button
4. Provide the AP’s MAC address and X, Y, and Z coordinates.
5. Select OK when completed to save your AP configuration.
5.8.4 Configuring SOLE Parameters
To configure the switch’s internal SOLE locationing engine:
1. Services > RTLS from the main menu tree.
2. Select the SOLE tab.
3. Check the Locate All Mobile-Units checkbox to locate all MUs known to the switch across all WLANs.
This will also disable manual entry of MU MAC addresses in the field below.
This takes effect immediately when the box is checked.
4. Enter a value for the MU Locate Interval in seconds.
The MU Locate Interval determines how often the locationing of MUs is updated. The valid range for
this is between 5 to 3600 seconds.