Installation guide

5-64 Motorola RF Switch System Reference
SOLE is capable of receiving input of location from external 3rd party location engines such as Aeroscout,
and Ekahau. SOLE also has a self learning process that adapts with a changing environment. SOLE also
provides an open platform for supporting new architectures, future algorithms or newer asset types.
5.8.3 Defining Site Parameters
In order for the locationing engine to function properly the site parameters must first be defined. Sites are
defined on an X,Y axis with the upper left corner of the site being assigned a value of 0,0. When the locations
of tags are displayed, they are displayed in the same X,Y format relative to the origin value of 0,0.
To configure your site parameters:
1. Select Services > RTLS from the main menu tree.
.
2. Select the Site tab.
3. Enter a Name and optionally a Description for the site:.
4. When mapping a site for locationing, an origin point must be selected in one of the corners of the site.
That origin will become the upper left corner of the site map with coordinates of 0,0. The length and
width of the site is then mapped out on the X and Y axis (with length being X and width being Y). Those
length and width along with the height are entered into the field below.
Name Enter a name for the site where locationing is deployed. This is for identification
purposes only.
Description Provide a description of the site where locationing is deployed. This is an optional
field.