Installation guide

Switch Services 5-61
3. Refer to the following within the Recently Found Devices screen to discern whether a located device
should be deleted from the list or selected to have its Web UI launched and its current configuration
modified.
IP Address Displays the IP address of the discovered switch. This IP address obviously falls
within the range of IP addresses specified for the discovery profile used for the
device search. If the IP addresses displayed do not meet your search expectations,
consider creating a new discovery profile and launching a new search.
Software Version Displays the software version running on the discovered device.
Product Displays the name of the device discovered by the device search. If the list of
devices discovered is unsatisfactory, consider configuring a new discovery policy
and launching a new search.
Redundancy Group
ID
If the discovered device is part of a redundancy group, its cluster ID displays within
this column. The Redundancy ID would have been assigned using the Switch >
Redundancy screen.
Device Name Displays the device name assigned to the discovered device. This name would
have been assigned using the Switch > Configuration screen.
Device Location Displays the device location defined to the discovered device. The location would
have been assigned using the Switch > Configuration screen.
Profile used for
Discovery
Displays the profile selected from within the Discovery Profiles tab and used with
the Start Discovery function to discover devices within the switch managed
network. If the group of devices discovered and displayed within the Recently
Found Devices tab does not represent the device demographic needed, consider
going back to the Discovery Profiles tab and selected a different profile for the
switch discovery process.