Installation guide

Switch Services 5-59
credentials must be verified before the switch displays discovered devices within the Recently Found
Devices table.
If SNMP v2 is used with a discovering profile, a Read Community String screen displays.The
Community String entered is required to match the name used by the remote network management
software of the discovered switch
.
If SNMP v3 is used with a discovering profile, a V3 Authentication screen displays. The User Name and
Password are required to match the name used by the remote network management software of the
discovered switch
.
When the credentials of the V2 Read Community or V3 Authentication screens are satisfied, the switch
discovery process begins.
7. If necessary, click the Stop Discovery button (enabled only during the discovery operation) to stop the
discovery operation.
5.7.1.1 Adding a New Discovery Profile
If the contents of an existing profile are no longer relevant to warrant modification using the Edit function,
then a new switch discovery profile should be created
To create a new switch discovery profile:
1. Select Services > Discovery from the main menu tree.
2. Click the Add button at the bottom of the screen.