Installation guide

4-156 Motorola RF Switch System Reference Guide
3. Select an Id and click the Edit button to revise the selected MSTP port configuration.
4.10.3.1 Editing a MSTP Port Configuration
To edit and reconfigure MSTP Port parameters.
1. Select a row from the port table and click the Edit button.
The following MSTP Port parameters can be reconfigured.
Admin Edge Port A green checkmark defines the listed index enabled as an Admin Edge Port, and a
red “X” defines the listed index as not being an Admin Edge Port. Enable it only on
ports that connect to a single location.
Oper Edge Port Oper Edge Port Displays whether the port is currently an edge port.
Admin Point-to-Point Displays the point-to-point status as ForceTrue or ForceFalse. ForceTrue indicates
this port should be treated as connected to a point-to-point link. ForceFalse
indicates this port should be treated as having a shared connection.
Oper Point-to-Point Displays whether the listed port index is configured to connect to another port
through a point-to-point link. A green checkmark indicates the port as supporting
point-to-point, and a red “X” indicates the port as having point-to-point disabled.
Port Index Displays the read-only Port Index.
Admin MAC Enable Displays the status of the Admin MAC Enable. A green check mark indicates the
status as enabled.
Port auto Edge Select the checkbox to use the port as an edge port.