Installation guide

Network Setup 4-147
2. View the firmware information displayed per Adaptive AP type with the following data:
3. To add a new AP firmware image, click the Add button. For information on adding a new AP firmware
refer to Adding a New AP Firmware Image on page 4-147.
4. To edit the details of an AP firmware image, highlight an AP image type and click the Edit button. For
information on adding a new AP firmware refer to Editing an Existing AP Firmware Image on page 4-148.
5. To delete an existing AP firmware image, highlight an AP image type and click the Delete button.
4.9.5.1 Adding a New AP Firmware Image
To add AP Firmware Image settings:
1. Select Network Setup > Access Port from the main menu tree.
2. Click the AP Firmware tab.
3. Click the Add button to display a screen to configure the AP Image Type and AP Image File.
4. Specify the AP Image Type.
5. Specify the AP Image File. You can browse the switch file systems using the browser icon. AP images
must be on the flash, system, nvram or usb file systems in order for them to be selected.
6. Click the OK button to save the changes and return to the AP Firmware tab.
AP Image Type The AP image type is the model of Access Port or Adaptive AP which the firmware
is used with. Available image types are:
• ap300Wisp
• ap300Wispe
• ap300lpsSensor
• ap100
• ap4131
• ap4131Revert
• ap5131
• ap5181
• ap7131
• ap7181
AP Image File Displays the filename of the image file associated with the AP Image Type.