Installation guide

4-146 Motorola RF Switch System Reference Guide
4.9.5 Configuring Adaptive AP Firmware
Refer to the AP Firmware tab to view the Access Port and Adaptive AP firmware image associated with
each adopted Access Port or Adaptive AP. The screen allows you to update the firmware image for Adaptive
APs that associate with the switch.
To view AP firmware information:
1. Select Network > Access Port from the main menu tree.
2. Click the AP Firmware tab.
1. Enable or disable Adaptive AP Automatic Update (AAP Automatic Update).
AAP Automatic
Update
Check this box to enable automatic updates of Access Port or Adaptive AP
firmware when an Access Port or Adaptive AP associates with the switch. The AP
image file used for automatic update are specified in the AP Image Upload
Table below.