Installation guide

4-140 Motorola RF Switch System Reference Guide
4.9 Configuring Access Ports
Use the Access Port screen to view device hardware address and software version information for adopted
and unadopted Access Ports. For more information, refer to the following Access Port configuration sections:
• Viewing Adopted Access Ports
• Viewing Unadopted Access Ports
• Viewing Sensor Information
• Configuring Secure WiSPe
• Configuring Adaptive AP Firmware
4.9.1 Viewing Adopted Access Ports
Use the Adopted AP tab for gathering device hardware address and software version information for the
Access Port. Use this information to determine whether the Access Port’s version supports the optimal
feature set available for the network.
To view existing adopted Access Port information:
1. Select Network > Access Port from the main menu tree.
2. Click the Adopted AP tab.
3. Refer to the Adopted AP screen for the following information:
Switch The Switch field displays the IP address of the cluster member associated with
each AP. When clustering is enabled on the switch and Cluster GUI is enabled the
Switch field will be available on the AP configuration screen. For information on
configuring enabling Cluster GUI, see Managing Clustering Using the Web UI.
MAC Address Displays the radio's first MAC address when it is adopted by the switch.