Installation guide

4-126 Motorola RF Switch System Reference Guide
10.Once the settings have been configured, click the Run Calibration button to start a Smart RF calibration.
11.Click the Calibration Status button to open a dialogue with the following calibration status information
12.Click OK to use the changes to the running configuration and close the dialog.
13.Click Cancel to close the dialog without committing updates to the running configuration.
Start Time If scheduled RF Calibration is enabled, enter a start time in HH:MM:SS format for
the start time of scheduled calibration.
Interval If scheduled RF Calibration is enabled, enter an interval in days for how long the
scheduled calibration should continue after its start date.
Last Calibration Start
Time
Displays the date and time that the last Smart RF calibration began.
Last Calibration End
Time
Displays the date and time that the last Smart RF calibration ended.
Next Calibration
Start Time
Displays the date and time scheduled for the next Smart RF calibration.
Current Action Displays what the Smart RF engine is currently doing. If there is a scan in process
it will be displayed here.
Master Switch IP Displays the IP address of the master switch in the cluster.
Is Cluster Master Displays the cluster master status of the switch. If the switch is the master it will
display true, otherwise it will display false.